Removing the control-buttons
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the stand.
2
Remove the
Procedure
1
Using a plastic scribe, push the securing clips on the control-buttons
board slot.
NOTE: Note the orientation of the control-buttons board so that
you can replace it correctly.
2
Press the securing clips and lift the control-buttons board off the display-
assembly base.
computer. After working inside your
back
cover.
After working inside your
49