Replacing The Display Cable; Procedure; Post-Requisites - Dell Inspiron 22 3000 Series Service Manual

Replacing the display cable

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Connect the display cable to the display assembly and close the latch to
secure the cable.
2 Adhere the tape that secures the display cable to the display assembly.

Post-requisites

1 Replace the display
2 Replace the system
3 Replace the speakers.
4 Replace the heat
5 Replace the fan.
6 Replace the microphone.
7 Replace the control-buttons
8 Replace the wireless
9 Replace the memory
10 Replace the system-board
11 Follow the procedure in step 3 to step 6 in
12 Replace the optical
13 Replace the back
14 Replace the stand.
84
computer. After working inside your
assembly.
board.
sink.
board.
card.
module.
shield.
drive.
cover.
After working inside your
"Replacing the hard drive".