Braking System Fluid Top Up - PIAGGIO beverly 500 User Manual

Should the level appear to be below the minimum mark, please contact your nearest
PIAGGIO dealer or authorised service centre in order to have a thorough inspection
of the brake system carried out.

Braking system fluid top up (03_16)

Proceed as follows:
Remove tank cover "D" and loosen the two screws "E" and top up the brake fluid level
using only the prescribed brake fluid and without exceeding the maximum level.
Under normal climatic conditions, the brake fluid should be replaced every 2 years.
03_15
This operation must be carried out by trained technicians; please contact your nearest
PIAGGIO dealer or an authorised service centre.
WARNING
BRAKE CIRCUIT FLUID IS VERY CORROSIVE; DO NOT LET IT COME INTO
CONTACT WITH PAINTED PARTS.
CAUTION
ONLY USE DOT 4-CLASSIFIED BRAKE FLUID.
WARNING
03_16
THE BRAKE FLUID IS HAZARDOUS: IN CASE OF ACCIDENTAL CONTACT,
WASH OFF WITH WATER.
WARNING
THE BRAKING CIRCUIT LIQUID IS HYGROSCOPIC, AND ABSORBS THE HU-
MIDITY OF SURROUNDING AIR. IF THE HUMIDITY IN THE BRAKING FLUID
EXCEEDS A CERTAIN VALUE, IT WILL LEAD TO INEFFICIENT BRAKING. NEV-
ER USE BRAKING FLUID KEPT IN CONTAINERS THAT HAVE ALREADY BEEN
OPENED, OR PARTIALLY USED.
Recommended products
AGIP BRAKE 4
Brake fluid
45