Using The Imatch Remote Control - KAL-FIRE Fairo ECO-line 60 User Manual

Using the iMatch remote control

12
12.1 Inserting the batteries
A battery compartment at the back of the remote control holds two AA batteries (these
are supplied with the appliance). Slide the battery cover downwards to open the
compartment. Insert the two batteries according to the diagram at the bottom of the
compartment. The display on the front of the remote control should then light up when
the button is pressed.
The iMatch remote control uses a radio-frequency signal (RF signal) to
relay information to the fire. The range of the signal is around 10
metres, but may be less if obstacles such as walls or furniture are
between the fire and the remote control. An RF signal is particularly
safe; however, it can sometimes result in a longer reaction time, so
the fire may not respond instantaneously. If the screen of the remote
control illuminates after a button is pressed, this indicates that the RF
signal has been sent.
48