Button And Button Descriptions; Program Selection - Gram OM 45-16 T RF Instruction Manual

Button and Button Descriptions

On / Off Button (1)
When you press the On/Off button,
the display switches on with the last
program used and it dims when you turn
the machine off.
If the Half Load (5), function are enabled
during the last program used, these
functions will remain active when the
machine is turned off and on again. If
you would like to disable these functions
after turning the machine off and on
again, you must press the relevant
buttons.
Start / Pause / Cancel Button (2)
It is used to start, pause or cancel the
selected program or the delayed start
countdown. The selected program will
start running when the Start / Pause /
Cancel button (2) is pressed. When the
button is pressed, (12) lights up.
Wait for two seconds to view the full
display on the screen after you turn on
the machine by pressing the On/Off
button (1) before you press Start / Pause
/ Cancel (2) button.
Program Selection Button (4)
You can select the washing program you
want to use with the aid of the "Program
Data and Table of Average Consumption
Values" after pressing the program
selection button. Number of the selected
program appears in the program
indicator (8) on the display (3) in the
format of
number will increase by one each time
you press the program selection button.
Number of the defined programs can
change depending on the model you
have purchased.
....... Program
18 GB
Half Load Button (5)
If you want to run your machine without
loading it completely, place your dishes
into the machine as you desire. First,
press the On / Off Button (1). Select
the desired program and press the Half
Load (5) button. You must see the Half
Load indicator (14)
the screen. Start the program by
pressing the Start / Pause / Cancel
button (2). Thanks to the Half Load
option, you can use both lower and
upper baskets of your machine and
you can save water and energy.
Delayed Start Button (6)
You can delay the start of the selected
program until 9 hours with increments
of 1 hour by means of the Delayed
Start Function.

Program Selection

You can select the desired program
after turning on the machine by
pressing the On / Off button (1).
Switch to the program you want to
operate by pressing program selection
button (4). You can follow up the
program you are in from the program
indicator (8) on the screen. Program
number will increase by one each time
you press the program selection button
(Number of the defined programs can
change depending on the model you
have purchased). The selected
washing program will start running
when the Start / Pause / Cancel button
(2) is pressed symbol (12) light up.
Time indicator (11) will start displaying
the estimated remaining time to the
end of program.
appearing on