Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
instructions for safety and environment This section contains safety • Never wash the product by instructions that will help to spreading or pouring water get protected from risk of onto it! There is the risk of personal injury or property electric shock! damage.
instructions for safety and environment running unless necessary. way and understand the Be careful for the rush of hazards involved. Children hot steam when you open shall not play with the the door. appliance. Cleaning and user maintenance shall Intended use not be made by children •...
instructions for safety and environment Transportation of the recycling of electrical and electronic equipment. Please product consult your local authorities If you need to move to learn about these collection the product, do it centers. in upright position Compliance with RoHS and hold from the Directive rear side.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation location Refer to the nearest Authorised Service Agent for installation of your • Place the product on a solid and product. To make the product ready flat floor that has sufficient load for use, make sure that the electricity, carrying capacity! The product must tap water supply and water drainage be installed on a flat surface in order...
Installation Connection to the drain Permitted water temperature: up to 25°C Water discharge hose can directly be The dishwasher may not be connected connected to the drain hole or sink’s to open warm water devices or flow- drainage. The length of this connection through water heaters.
Installation aquAvoid™ plus Electrical connection (depends on model) Connect the product to a grounded The aquAvoid™ plus system protects outlet protected by a fuse complying against water leaks that may occur with the values in the “Technical at the hose inlet.Water contact with specifications”...
Installation If the product has a failure, it should not be operated unless it is repaired by the Authorised Service Agent! There is the risk of electric shock! Initial use Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions”...
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and Cleaning, rinsing and drying energy-efficient manner. performance of your dishwasher will Wipe away any coarse food remnants increase when water softening system on the dishes before putting them in is adjusted properly.
Page 14
Installation Use the test strip supplied with the product according to the steps given below to determine hardness level of your supply water. Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for...
Preparation 2. Turn the salt reservoir lid counter- If you move your house, clockwise to open it (A). it is necessary to readjust water hardness level of your machine by considering the information given above according to the hardness level of the supply water in your new location.
Preparation You need to add salt right Do not put solvents into the before starting the machine. detergent dispenser. There Thus, the overflowing is the risk of explosion! salty water will be flushed Put the detergent into the detergent immediately, preventing dispenser just before operating the the risk of corrosion in machine as illustrated below.
Preparation Water softening salt and rinse aid 3. Push the lid of the detergent must also be used together with the dispenser to close it. A "click" will detergent if the water hardness level is be heard when the lid is closed. above the mentioned level.
Preparation readjust the water hardness level so as to suit the water supply. 4. Make the appropriate rinse aid settings. Rinse aid The rinse aid used in dishwashers is a special combination that aims to 4. If there are stains on tableware increase drying efficiency items after washing, level must and prevent water or lime...
Preparation Decorative prints of To prevent possible injuries, chinaware as well as always place the sharp and aluminium and silver items pointed dishes such as may get discoloured or service fork, bread knife, tarnished after washing in etc. upside down so as their the dishwasher just as it pointed ends will face down happens in handwashing as...
Page 20
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware /44 EN...
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash Cutlery basket is designed to wash your dishes such as knife, fork, spoon, your dishes such as knife, fork, spoon, etc. in an efficient manner. etc.
Preparation Collapsible lower basket tines Bringing the tines to the horizontal position by (depends on model) holding them from the There are foldable tines (A) located tips may cause them to at the lower basket of the machine bend. Therefore, it will be are designed for an easier placement appropriate to bring the tines of large pieces such as pans, bowls,...
Preparation SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend.
Preparation Lower basket multipurpose / Make sure that the impeller height adjustable service rack does not touch the dishes (depends on model) you placed on the racks. This accessory located at the lower basket of your machine allows you To close the racks: to easily wash pieces such as extra 1.
Preparation Upper basket height Upper basket multipurpose adjustable rack service rack (depends on model) (depends on model) Use the lower and upper parts of the This accessory located at the upper height adjustable racks in the upper basket of your machine allows you to basket of the machine by sliding them easily wash pieces such as extra long down or up according to the heights of...
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket 1. Hold the upper basket wires with (depends on model) both hands, slightly lift up the The upper basket height adjustment basket and simultaneously push mechanism has been designed for and release the latches shown in...
Preparation Collapsible upper basket Height setting with empty wires basket (depends on model) (depends on model) You can use collapsible wires when In this model, the height setting of the you need a larger space for your upper basket may be changed using dishes in the upper basket of your the wheels which are mounted at two machine.
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc.
Operating the product 1. On/Off key 2. Programme Selection / Programme Cancel (3 seconds) key 3. Function keys Half Load function Rapid Clean Function Extra Drying Function TurboWash Function 4. Programme indicator 5. Salt indicator Not in use 7. Start / Cancel indicator 8.
Operating the product Keys Preparing the machine On/Off key 1. Open the door of the dishwasher. When you press On / Off key, indicator 2. Place the dishes in accordance lights illuminate on the display for ON with the instructions in the user position.
Operating the product Auxiliary functions Rapid Clean Function It shortens the time of the washing Washing programmes of your cycle selected and decreases water dishwasher are designed to obtain the consumption by enabling washing best cleaning effect, considering the under higher pressure. type of the soiling, soiling degree and properties of the dishes to be washed.
Operating the product 3. Turn off the machine with On/Off Interior Lighting key to save the changes. (Depends on the model) Some models have interior lighting to Changing Warning Sound Volume illuminate the interior when the door is 1. After switching your machine opened.
Operating the product 4. Close the door of your machine Your machine performs after setting the Delayed Start. water softening depending Once the delay time is over, the on the hardness level of selected programme will start the supply water. Washing automatically.
Operating the product 4. Press On / Off key to save the There might be residues setting. of detergent or rinse aid in the machine and/or on No rinse aid dispensed in P:0 wash the pieces being washed position. depending on the step 1 dose of rinse aid is dispensed in P:1 the programme you have position.
Operating the product ProCare Leave your dishes in the This programme is recommended machine for about 15 to be operated on each 1-2 months minutes to allow them cool for machine cleaning and necessary down after they are washed. hygiene. The programme should be Your dishes will dry in a operated while the machine is empty.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if Clean the filters at least once a week it is cleaned at regular intervals. in order for the machine operates efficiently. Check if food residues are Unplug the product and turn left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a Check if the holes on the upper week in order for the machine operates impeller (1) are clogged. If they efficiently. are clogged, remove and clean the Lower impeller impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 41
Troubleshooting Dishes are not dry at the end of cycle • Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no water will accumulate in them. • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary.
Page 42
Troubleshooting • Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the supply water appropriately and check the water hardness setting. • Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while adding salt.
Page 43
Troubleshooting they are used for purposes such as opening cans. Do not use metal kitchen utensils out of their intended uses. • Cutlery are made of low quality stainless steel. >>> Corrosion on such items is inevitable; they should not be washed in dishwashers. •...
Page 44
Troubleshooting • Dishes are not placed orderly in the machine. >>> When placing the glasses and other glassware into the basket lean them not against other dishes but the edges or racks of the basket or the glass support tines. Striking of the glasses to each other or to other dishes due to the impact of water during washing can cause breaks, or scratches on their surfaces.