Additional Safety Points For Your Drill - Worx WU305 Manual

ADDITIONAL SAFETY
POINTS FOR YOUR DRILL
1. Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
2. Fully unwind cable drum extensions to
avoid potential overheating.
3. When an extension cable is required you
must ensure it has the correct ampere
rating for your power tool and that it is in a
safe electrical condition.
4. Ensure your mains supply voltage is the
same as your tool rating plate voltage.
5. Your tool is double insulated for additional
protection against a possible electrical
insulation failure within the tool.
6. Always check walls and ceilings to avoid
hidden power cables and pipes.
7. After long working periods, external metal
parts and accessories could be hot.
8. Wear eye protection when operating this
tool.
9. Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
08
10. Use auxiliary handles supplied with
the tool. Loss of control can cause
personal injury.
11. Hold tool by insulated gripping
surfaces when performing an
operation where the cutting tool
may contact hidden wiring. Contact
with a 'live' wire will also make exposed
metal parts of the tool'live'and shock the
operator.
Hammer drill
13L-WU305 WU307-M-070305.indd 8
SYMBOLS
Read the manual
Warning
Wear eye protection
Double insulation
Wear ear protection
Wear dust mask
ENG
4/24/2007 10:01:12 AM