Table of Contents
Advertisement
5.4.3. FIRST TIME INSTALLATION
"Automatic channel scan" is activated by selecting "OK" when the line is highlighted. A pop-up menu
appears on the screen, select "YES" the automatic scan begins. All the multiplexes are searched and
a channel table is created automatically. All channels found are stored in a sorted form with respect to
their channel numbers. Selecting "NO" will cancel the operation.
6. MESSAGES
When the box receives no signal (e.g. the antenna cable is
disconnected), "NO SIGNAL" message is seen on the screen.
When there are no channels stored in the box; the Channel
List menu is not accessible. Channel navigation is not
allowed. Therefore, trying to enter these menus or navigate
the channels will display an error message on the screen.
7. SPECIFIC FUNCTIONS OF REMOTE CONTROL
When there is no menu active on the screen, each of the keys have specific functions.
OK KEY: when "OK"key is pressed Channel list appears on the screen.
RECORD KEY
The programs are recorded at once.
Ø Record time is attained from EPG automatically. If the program has EPG information, you could
set the timer. If there is no EPG info, press the Record button to set the timer in 30 minutes
periods.
Ø In EPG by pressing the record key, programs are recorded instantly.
LIB KEY: by pressing this key, you will get to the Recordings Library, which shows you the details of
your saved recordings. By pressing it again, you will exit the Recordings Library.
SUBTITLE : subtitle key shows/hides subtitles of channel. When the subtitle key is pressed,subtitle
ON/OFF message is displayed.
INFO KEY
When "INFO" key pressed, and when changing channels the information window is displayed on the
lower part of the screen. The small bar indicates the program duration. On the channel info window
there are
Ø Current event name next event name, and their start and end times.
Ø Program duration bar
Ø Program mode (TV or Radio)
Ø Channel number
Ø Name of the channel
24
Hide quick links:
Advertisement
Table of Contents
