Table of Contents
Advertisement
Replacing the Display Assembly
1. Follow the procedures in
Before You
2. Slide the tabs on the display hinges into the slots in the computer base.
3. Align the display assembly with the computer base using the alignment posts on the computer base and set the display assembly in place. Ensure the
display cable and Mini-Card antenna cables route correctly through the display hinge covers.
4. Replace the four screws that secure the display assembly to the computer base.
5. Route the Mini-Card antenna cables through the routing guides on the computer base.
1
slots on computer base (2)
3
display hinges (2)
5
routing guides
7
alignment posts (3)
6. Replace the SIM board (see
7. Follow the instructions from
8. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Display Hinge Covers
Removing the Display Hinge Covers
CAUTION:
The display hinge covers are extremely fragile. Be careful when removing the display hinge covers to prevent damaging them.
1. Follow the procedures in
Before You
2. Follow the instructions from
3. Remove the display assembly (see
4. Press in on the display hinge covers to release them from the display assembly.
Begin.
2
tabs on display hinges (2)
4
Mini-Card antenna cables
6
display hinge covers (2)
Replacing the SIM
Board).
step 5
to
step 21
in
Replacing the System
Battery).
Begin.
step 3
to
step 15
in
Removing the System
Removing the Display
Assembly).
Board.
Board.
Hide quick links:
Advertisement
Table of Contents
