Removing The Display Hinge And Bracket Assembly; Prerequisites; Procedure - Dell Inspiron 15-7557 Service Manual

Removing the display hinge
and bracket assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

NOTE: These instructions are applicable only for laptops with a non-
touch screen display.
1 Remove the battery.
2 Remove the
3 Follow the procedure from step 1 to step 3 in
4 Remove the keyboard.
5 Follow the procedure from step 1 to step 7 in
6 Remove the fans.
7 Remove the
8 Remove the
9 Remove the

Procedure

1 Note the antenna-cable routing and remove the antenna cables from the
routing guides on the display hinges.
2 Note the display cable routing and remove the display cable from the
routing guides on the display hinges.
3 Remove the screws that secure the display hinges to the display back-
cover.
computer. After working inside your
base cover.
display assembly.
display bezel.
display panel.
After working inside your
"Removing the hard
"Removing the palm
drive".
rest".
85