READ AND SAVE THESE INSTRUCTIONS:
When using electrical appliances, basic safety precautions should always be followed:
Your cooler runs on 220 Volt AC, 50Hz current. Check the
•
household voltage to ensure it matches the appliance's rate
specification.
•
Before operating the product remove it from its packaging
and check it is in good condition.
•
DO NOT operate any product with a damaged cord or plug.
DO NOT run power cord under carpeting, or cover it with
•
rugs or runners. Keep the cord away from areas where it
may be tripped over.
•
Always unplug the product before refilling the water tank.
•
Always unplug the appliance from the power source before
cleaning, servicing or relocating the unit.
Remove the power cord from the electrical receptacle by
•
grasping and pulling on the power cord plug-end only,
never pull the cord.
•
DO NOT use the product in areas where gasoline, paint or
other flammable goods and objects are stored.
When using the ''COOL'' setting, check the water tank to
•
ensure that it is full. Operation of this cooler on the
''COOL''setting with an empty tank may result in damage to
the water pump.
SAFETY
220V AC 50Hz
SHOCK HAZARD
WATER LEVEL INDICATOR
5