Download  Print this page

Honeywell CO25MM Maintenance Manual

Hide thumbs
   

Advertisement

Quick Links

Portable Evaporative Air Cooler
Safety & Maintenance Guide
User tips and safety instructions
www.honeywellaircoolers.com
E-mail: info@honeywellaircoolers.com

Advertisement

loading

  Also See for Honeywell CO25MM

  Related Manuals for Honeywell CO25MM

  Summary of Contents for Honeywell CO25MM

  • Page 1 Portable Evaporative Air Cooler Safety & Maintenance Guide User tips and safety instructions www.honeywellaircoolers.com E-mail: info@honeywellaircoolers.com...
  • Page 2: Cooler Location

    USER TIPS What is Evaporative Cooling? Honeywell Evaporative Air Coolers are built to maximize energy efficiency and keep energy costs low. Warm air is drawn into the cooler and enters the Honeycomb Cooling Media. Water pumped from the water tank pours over the Honeycomb Cooling Media. As the warm air passes through the Honeycomb Cooling Media, the water absorbs the heat, naturally cooling and humidifying the air.
  • Page 3: Safety Rules

    • Set the unit on a solid flat surface. IMPORTANT: Honeywell Outdoor Air Cooler models are designed to IPX4 product standards and not recommended to be placed outdoors during heavy rain or snow. SAFETY RULES WARNING—READ AND SAVE THE AIR COOLER GUIDE AND USER MANUAL...
  • Page 4 Coil the power cord and store it away from the floor to protect it. *Carbon Dust Filter is available in specific models of Honeywell Air Coolers only. Check the User Manual for your model to see if it includes a Carbon Dust Filter.
  • Page 5: Troubleshooting Guide

    TROUBLESHOOTING GUIDE Customer Service Center: See the last page of the User Manual to find the contact details for the Customer Service Center for your area. PROBLEM POSSIBLE CAUSE SOLUTION No discharge of air. Cord is not plugged in. Make sure power cord is plugged in and the switch is Power is not ON.
  • Page 6 Portable Evaporative Air Cooler User Manual Read and save these instructions before use www.jmatek.com Model: CO25MM E-mail: usinfo@jmatek.com...
  • Page 7: Parts Description

    PARTS DESCRIPTION (13) (12) (11) (10) (14) 1) Tray for Tools 6) Casters 11) Rear Grill 2) Control Panel 7) Water Level Indicator 12) Left Side Grill 3) Louvers 8) Water Inlet Cover 13) Right Side Grill 4) Water Tank 9) Water Fill Hole 14) Rear Grill Screws 5) Water Inlet Valve...
  • Page 8 USE & OPERATION (CONTINUED) COOLER LOCATION Make sure to position the air cooler correctly before you set up and start using the product. Please refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide. FILLING WITH WATER CAUTION: Unplug the unit from the electrical power outlet before emptying or refilling the water tank.
  • Page 9 USE & OPERATION (CONTINUED) CLEANING THE HONEYCOMB COOLING MEDIA The appliance is supplied with three Honeycomb Cooling Media pads. The Honeycomb Cooling Media are located inside the Rear and Side Grills. See Step 1 to Step 6 for instructions on how to remove them from the unit for cleaning and maintenance. Do not run the unit in COOL mode with stale water in the tank.
  • Page 10 JMATEK North America LLC Made in China © 2015 JMATEK Limited. All rights reserved. Mahwah, New Jersey 07495 USA The Honeywell Trademark is used under license from Phone: 1-800-474-2147 Honeywell International Inc. Honeywell International Inc. makes no representations Email: usinfo@jmatek.com or warranties with respect to this product.