Download  Print this page

Draning/Cleaning Water Tank - Honeywell CO25MM Owner's Manual

Portable evaporative air cooler for outdoor, indoor & commercial use
Hide thumbs

Advertisement

Draning and Cleaning the Water Tank
Turn the power "off" and disconnect the air cooler from the power
supply.
Move the unit to a location where it can be drained.
Remove the drain plug and allow the tank to empty(refer page 10, part
13).
Refill the water tank up to the maximum level with clean water and
drain it completely.
Fill water tank and rinse at least 2-3 times before use.
After cleaning ensure that the drain plug is back in place.
Plug into the power supply and turn on unit.
Cleaning the Honeycomb Cooling Media
Turn off the unit, and unplug the power cord from wall
outlet.
Rotate the unit facing the back panel, and locate the Rear
Grill Removal Screws (refer page 10, part 14). Remove all
the screws with a screw driver.
Pull the rear grill panel, until it is completely removed.
The Honeycomb Cooling Media can now be seen. Clean
the carbon filter & honeycomb with clean cloth to remove
all the dust & dirt particles.
Once cleaning is finished, reassemble the unit as
described above.
Plug into the power supply and turn on unit.
The air cooler is now ready to be used. This cleaning
process should be repeated monthly to maintain the
integrity of the unit and to remove particles filtered from
the air.
CLEANING & MAINTENANCE
Fig.1
Honeycomb
Back Panel
Water Drain Plug
Honeycomb
Holder
Screw
Back Panel
Honeycomb
Holder
Screw
Side Panel
15

Advertisement

loading

  Also See for Honeywell CO25MM

  Related Manuals for Honeywell CO25MM