Brother MFC-L5700DN Online User's Manual page 633

Level 1 Level 2
2-sided Single Image
Auto Continue -
Carbon Menu Carbon Copy
Copies
Copy1 Tray
Copy1 Macro
Copy2 Tray...
Copy8 Tray
Copy2 Macro...
Copy8 Macro
HP Tray -
Command
Reset Printer -
[All Settings] > [Network]
Level 1
Wired LAN
(For network models)
Level 3
-
-
-
-
-
-
-
-
-
-
Level 2 Level 3
TCP/IP BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS
Configuration
WINS Server
DNS Server
APIPA
IPv6
Ethernet -
Descriptions
For a print job where the last page is a 1-sided image,
select the 1-sided Feed option to reduce printing time.
When you use Letterhead or Preprinted paper, you must
select the 2-sided Feed option. If you select 1-sided
Feed for Letterhead or Preprinted paper, the last page will
be printed on the reverse side.
Select this setting if you want the machine to clear paper
size errors or media type errors, and use paper from other
trays.
Enable or disable the Carbon Copy function.
Sets the number of printed pages.
Select the tray you use for Copy1.
Select a macro for Copy1.
Select the tray you use for Copy2 to 8.
The menu appears when printing two pages or more.
Select a macro for Copy2 to 8.
The menu appears when printing two pages or more.
Select the correct version of HP LaserJet emulation.
Restore the printer settings to the factory settings.
Level 4
IP Boot
Tries
-
-
-
-
-
Primary
Secondary
Primary
Secondary
-
-
-
Descriptions
Select the BOOT method that
best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
(up to 32 characters)
Select the WINS configuration
mode.
Specify the IP address of the
primary WINS server.
Specify the IP address of the
secondary WINS server.
Specify the IP address of the
primary DNS server.
Specify the IP address of the
secondary DNS server.
Set the machine to allocate the
IP address from the link-local
address range automatically.
Turn the IPv6 protocol on or off.
To use the IPv6 protocol, go to
the Brother Solutions Center at
support.brother.com for more
information.
Select the Ethernet link mode.
626