Brother MFC-L5700DN Online User's Manual page 418

Home > Security > Network Security Features
®
Directory Authentication Using Web Based Management
Configure Active Directory
Management
®
Active Directory authentication supports Kerberos authentication and NTLMv2 authentication. You must
configure the SNTP protocol (network time server) and DNS server configuration for authentication.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click
4. Click the Administrator tab.
5. Click the User Restriction Function menu in the left navigation bar.
6. Select Active Directory Authentication.
7. Click Submit.
8. Select Active Directory Authentication in the left navigation bar.
9. Configure the following settings:
Option
Storage PC Print Data
Storage Fax RX Data
Remember User ID
Active Directory Server
Address
Active Directory Domain
Name
Protocol & Authentication
Method
Get Mail Address
Get User's Home Directory
1
LDAP Server Port
LDAP Search Root
If this option is not available, update your machine's firmware. Go to your model's Downloads page on the Brother Solutions Center
1
at support.brother.com.
10. Click Submit.
®
Authentication Using Web Based
Description
Select this option to store incoming print data. After you log on to the
machine, your PC print jobs will be printed automatically. This feature is
available only for print data created by a Brother native printer driver.
Select this option to store incoming fax data. You can print all incoming fax
data after you log on to the machine.
Select this option to save your User ID.
Type the IP address or the server name (for example: ad.example.com) of
the Active Directory
Type the Active Directory
Select the protocol and authentication method.
1
Select this option to obtain logged on user's email address from the LDAP
server. (available only for LDAP + kerberos authentication method)
Select this option to obtain your home directory as the Scan to Network
destination. (available only for LDAP + kerberos authentication method)
Type the LDAP server port number (available only for LDAP + kerberos
authentication method).
Type the LDAP search root (available only for LDAP + kerberos
authentication method).
> Use Active Directory
®
Server.
®
domain name.
®
Authentication > Configure Active
.
411