Set The Telephone Line Type - Brother MFC-L5700DN Online User's Manual

Home > Fax > Telephone Services and External Devices

Set the Telephone Line Type

Related Models: MFC-L5700DN/MFC-L5750DW/MFC-L6800DW/MFC-L6900DW
If you are connecting the machine to a line that features PBX or ISDN to send and receive faxes, you must select
a Telephone Line Type that matches your line's features.
1. Press [Settings] > [All Settings] > [Initial Setup] > [Phone Line Set].
2. Press [Normal], [PBX], or [ISDN].
3. If you selected [PBX], do the following steps:
a. Press [On] or [Always].
• If you select [On], the machine dials a prefix number before the fax number only when [R] is pressed.
• If you select [Always], the machine always dials a prefix number before the fax number.
b. Press [Dial Prefix].
c. Enter the prefix number using the LCD, and then press [OK].
Use the numbers 0 to 9, #, * and !. You cannot use ! with any other numbers or characters.
4. Press .
Related Information
• Telephone Services and External Devices
• PBX and TRANSFER
> Set the Telephone Line Type
270