Brother MFC-L5700DN Online User's Manual page 626

Level 1
WLAN
(For wireless network
models)
Wi-Fi Direct
(For wireless network
models)
Level 2 Level 3
TCP/IP IPv6
Setup Wizard -
WLAN -
Assistant
WPS -
WPS w/ PIN -
Code
WLAN Status Status
Signal
SSID
Comm. Mode
MAC Address -
Set to -
Default
WLAN Enable -
Push Button -
PIN Code -
Manual -
Group Owner -
Device Device Name
Information
SSID
IP Address
Status Status
Information
Signal
Level 4 Descriptions
- Turn the IPv6 protocol on or off.
To use the IPv6 protocol, go to
the Brother Solutions Center at
support.brother.com
information.
- Configure the wireless network
settings using the setup wizard.
- Configure your wireless
network settings using the
Brother CD-ROM.
- Configure your wireless
network settings using the one-
button push method.
- Configure your wireless
network settings using WPS
with a PIN.
- View the current wireless
network status.
- View the current wireless
network signal strength.
- View the current SSID.
- View the current
Communication Mode.
- View the machine's MAC
address.
- Restore the wireless network
settings to the factory settings.
- Turns the wireless interface on
or off.
- Configure your Wi-Fi Direct
network settings using the one-
button push method.
- Configure your Wi-Fi Direct
network settings using WPS
with a PIN code.
- Configure your Wi-Fi Direct
network settings manually.
- Set your machine as the Group
Owner.
- View your machine's device
name.
- View the Group Owner's SSID.
When the machine is not
connected, the LCD displays
Not Connected.
- View your machine's current IP
Address.
- View the current Wi-Fi Direct
network status.
- View the current Wi-Fi Direct
network signal strength.
for more
619