Connecting The Ac Power Cord - HP 6600 User Manual

Connecting the AC power cord

WARNING!
Make sure that each power cord has a separate circuit breaker.
•
Turn off the circuit breaker before connecting the power cord.
•
Follow these steps to connect the AC power cord:
1. Make sure the power switch is in the OFF position.
2. Plug one end of the power cable shipped with the device into the
power socket.
3. Fix the power cord to the power module handle by using a cable
tie.
Figure 6 Connect and fix the power cord
4. Plug the other end into the AC power socket of the AC power
source, and turn on the circuit breaker of the power cord.
5. Turn on the power switch, and check that the status LED is ON. It
indicates that the power cord is correctly connected. If the status
LED is OFF, troubleshoot the installation process until the status
LED is ON.
12