Configuration
DI and DO
Network camera provides a general I/O terminal block with one digital input
and digital output for device control. The I/O connector provides the physical
interface for digital input (DI+. GND) and digital output (DO+, GND) that is used for
connecting a diversity of external alarm devices to the camera such as IR-Sensors
and alarm relays.
Set up the event source as Digital Input on Event Settings > Sever Settings
(how to send alarm message) / Media Settings (send what type of alarm)
message)/Event settings/. Or you can set up trigger digital output.
Please refer to "Event Settings" on page 67 for detailed information.
D-Link DCS-6517 User Manual
66