Live Video - D-Link DCS-6517 User Manual

Configuration
Once finished with the setting in the Viewing Window, click Save to enable the
settings and click Close to exit the window. The selected Output Frame Size will
immediately be applied to the Frame size of video stream. You can then go back to
the Live Video to test the new settings.
Sensor Setting: Click Sensor Setting to open the Sensor Setting page. On this
page, you can set the maximum exposure time, exposure level, and AGC (Auto
Gain Control) setting. You can configure two sets of sensor setting: one for normal
situations, the other for special situations, such as day/night/schedule mode.
Exposure
• Maximum Exposure Time: Select a proper maximum exposure time according
to the light source of the surroundings. Shorter exposure times result in less
light reaching the sensor. The exposure times are selectable for the following
durations: 1/120 second, 1/60 second, 1/30 second, 1/15 second, and 1/5
second.
• Exposure level: You can manually set the Exposure level which ranges from 1 to
8 (dark to bright).
• Max. Gain (Auto Gain Control): You can manually set the AGC level (2X 4X, 8X,
16x, or 32x). The higher the value, the brighter the image will be.
You may click Preview to fine-tune the image, or click Restore to recall the original
setting without incorporating the changes. When completed with the setting on
this page, click Save to enable the setting and click Close to exit the page. If you
want to configure another sensor setting for day/night/schedule mode, please click
Profile 2 and follow the steps below to setup:
1. Click Enable this profile.
2. Select the applied mode: Day mode, Night mode, or schedule mode. Please
manually enter a range of time if you choose Schedule mode.
3. Configure Exposure setting in the second column.
4. Click Save to enable the setting and click Close to exit the page.
D-Link DCS-6517 User Manual 43