Maintenance - D-Link DCS-6517 User Manual

Configuration

Maintenance

This chapter explains how to restore the camera to factory default, upgrade
firmware version, etc.
Schedule Reboot: This feature allows you to perform a schedule reboot the
camera. Check and input the reboot time and the week days you wants. This
function needs setup the correct time and date for right perform.
Reboot: This feature allows you to reboot the camera, which takes about one
minute to complete. When completed, the live video page will be displayed in your
browser. The following message will be displayed during the reboot process.
If the connection fails after rebooting, manually enter the IP address of the camera
in the address field to resume the connection.
Restore to default: This feature allows you to restore the camera to factory default
setting.
Export setting backup file: Click to export all parameters for the device and user-
defined scripts.
Upload setting backup file: Click Browse... to upload a setting backup file. Please
note that the model and firmware version of the device should be the same as the
setting backup file. If you have set up a fixed IP or other special settings for your
device, it is not suggested to upload a settings backup file.
Firmware upgrade: This feature allows you to upgrade the firmware of your
camera. It takes a few minutes to complete the process.
Note: Do not power off the camera during the upgrade!
D-Link DCS-6517 User Manual 80