Installation
Installation
Hardware Installation
Assembly and Installation
Locate a suitable position on the ceiling which is capable of supporting the weight of the
camera. Attach the alignment sticker to the ceiling or wall.
Drill four separate holes corresponding to the holes in the mounting template and insert
the plastic anchors into four holes. Cut an access hole in the ceiling for the cables.
Thread the cables through the waterproof plugs at the bottom of the base of the camera.
Attach the cables to the corresponding cable connectors. Connect the Camera bottom
Ethernet cable and the other cable, threading them through the hole in the ceiling.
Connect to the Ethernet cable.
D-Link DCS-6517 User Manual
15