Table of Contents
Advertisement
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the
timer,
V
x
clock, press the
button repeatedly until the
0
to the relevant symbol. The display shows the value for a few
seconds.
Clock
After connecting the appliance to the mains or after a power
cut, the
symbol and three zeros flash in the display. Set the
0
clock.
Press the
button.
0
1.
The clock in the display shows 12:00. The time symbols light
up and the
N
arrow is next to
Use the
or
button to set the clock.
@
A
2.
After a few seconds, the time that has been set is adopted.
Childproof lock
To prevent children from switching on the oven accidentally, it
has a childproof lock.
The
Æ
main oven does not respond to any settings. You can
still set the clock and the timer when the childproof lock is
activated.
If the heating type and temperature or grill setting are set, the
childproof lock interrupts the heater element.
Changing the basic settings
Your oven has various basic settings. These settings can be
customised to suit your requirements.
Basic setting
Selection 1 Selection 2 Selection 3
c1 Clock display
always*
c2 Signal duration
approx.
upon completion of
10 seconds
a cooking time or
timer period
c3 Waiting time until a
approx.
setting is applied
2 seconds
* Factory setting
12
arrow.
N
cooking time,
end time or
y
arrow is next
N
0
.
only with
-
the
but-
0
ton
approx.
approx.
2 minutes*
5 minutes
approx.
approx.
5 seconds*
10 seconds
Changing the clock
No other time-setting option should have been set.
Press the
button four times.
0
1.
The time symbols light up in the display and the
0
next to
0
.
Use the
or
@
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Switching on the childproof lock
No cooking time or end time may be set.
Press and hold the
The
@
symbol appears in the display. The childproof lock is
activated.
Switching off the childproof lock
Press and hold the
The
@
symbol in the display goes out. The childproof lock is
deactivated.
No other time-setting option should have been set.
Press and hold the
1.
The current basic setting for the clock display is shown in the
display, e.g. c1 1 for selection 1.
Use the
or
@
2.
Confirm by pressing the
3.
The next basic setting appears in the display. You can scroll
through all levels with the
with the
or
@
To finish, press and hold the
4.
All basic settings are applied.
You may change the basic settings at any time.
button to change the clock.
A
button for approximately 4 seconds.
h
button for approximately 4 seconds.
h
0
button for approx. 4 seconds.
button to change the basic setting.
A
0
button.
button and change the setting
0
button.
A
button for approx. 4 seconds.
0
arrow is
N
Advertisement
Table of Contents
