Controlling The Bluetooth Mobile Phone - Hfp, Hsp - Sony DRC-BT60 Operating Instructions Manual

Controlling the
Bluetooth mobile
phone – HFP, HSP
The operation of the buttons on the
unit varies depending on your mobile
phone.
HFP or HSP is used for a Bluetooth
mobile phone. Refer to the operating
instructions supplied with your
Bluetooth mobile phone on supported
Bluetooth profiles or how to operate.
HFP
Status
Short Press
Standby Start Voice
Dial*
Voice Dial Cancel Voice
active Dial*
Outgoing call End outgoing
Incoming call Answer
During call End call
 button  button
Status
Outgoing call Change call
device to the
During call
button
Long Press
Last number
redial
1
—
1
Change call
call device
Reject
Change call
device
Change call
device to the
unit Bluetooth
mobile phone
HSP
Status
Short Press
Standby
Outgoing call End outgoing
Incoming call Answer
During call End call*
* Some functions may not be supported
1
depending on the Bluetooth mobile
phone. Refer to the operating instructions
supplied with your mobile phone.
* This may vary, depending on the
2
Bluetooth mobile phone.
* Some functions may not be supported
3
when calling using the Bluetooth mobile
phone.
button
Long Press
— Dial*
1
End outgoing
call* call or change
1
call device to
the unit*
—
Change call
3
device to the
unit
2

GB