Additional Information; Settings - Sony DRC-BT60 Operating Instructions Manual

ADDITIONAL INFORMATION

Settings

 button
You can change settings of the unit
and initialize settings by operating
from (Settings) of the HOME
menu. See "About the HOME menu"
(page 9) for the list of setting items.
1
Press the / button on
the HOME menu to select
(Settings), and then press the
 button to confirm.

Press the / button to
select the desired item
("Bluetooth," "FM Tuner,"
"Brightness" or "Initialize"),
and then press the  button
to confirm.
For details of settings, see the following.
Bluetooth
You can perform Bluetooth settings.
Select items by pressing the /
button (select) and  button
(confirm) repeatedly. The default
setting is underlined.
Sound Quality
Set this function to "Standard" when
sound skips frequently during
playback.
High Quality
/
Standard
button
* Bit rate is a numerical value which
represents data transmission volume per
second. The higher the bit rate, in general,
the better quality the sound will be. The
unit can receive high bit rate music but
sound skips may occur depending on the
usage environment.
Note
You cannot set this function during
Bluetooth connection with A2DP. Set this
function after disconnecting from A2DP.
Video Mode
The sound output from the unit may
not sync with the picture when
watching video by connecting to the
Bluetooth device with A2DP. In this
case, you can adjust the delay between
the picture and sound.
Off
ON
Tip
If you set "Video Mode" to "On," the
(Video Mode) icon is displayed.
Note
If you set "Video Mode" to "On," you can
adjust the sound delay; however sound skips
may occur, depending on the usage
environment.
Bit rate* is high, and the
sound is better quality.
Bit rate* is low to prevent
sound from skipping.
Normal setting.
Adjusts the sound delay.
Continued
9
GB