Selecting Broadcast Stations - Sony DRC-BT60 Operating Instructions Manual

Selecting broadcast
stations
There are 2 ways (preset or manual
tuning) to select broadcast stations.
You can switch 2 ways by pressing the
FM button briefly.
Preset Tuning
In the preset tuning mode, you can
select broadcast stations by preset
number.
Manual Tuning
In the manual tuning mode, you can
select broadcast stations by frequency.
Preset Tuning
Preset numbers appear with and on
either side.
To
Select the previous
preset number
Select the next preset
number
Notes
 You cannot select broadcast stations if no
preset stations are entered. Preset
receivable stations using "Presetting
broadcast stations" (page 27).
 If you listen to FM radio during music
playback, playback on the Bluetooth device
will stop automatically. If it is not happen,
stop the playback on the Bluetooth device.
6
GB
Operation
Press the TUNE–
button briefly.
Press the TUNE+
button briefly.
Manual Tuning
Frequency appears with and on
either side.
To
Select the previous
frequency
Select the next
frequency
Select the previous
receivable broadcast
station*
Select the next
receivable broadcast
station*
* By pressing and holding the TUNE+/–
button during FM reception, the previous
(or next) broadcast station is found. If the
broadcast station is receivable, the
reception is accepted.
If many unnecessary broadcast stations are
received, set "Scan Sens" (page 30) to
"Low."
Operation
Press the TUNE–
button briefly.
Press the TUNE+
button briefly.
Press and hold the
TUNE– button.
Press and hold the
TUNE+ button.