Symbols On The Machine; Safety Devices; Operation; Prior To Initial Operation - Metabo Classic 250 Operating Instructions Manual

A
Hazard generated by oil-satu-
rated compressed air!
•
Use oil saturated compressed air
only for air tools requiring such sup-
ply.
•
Do not use an air hose used to sup-
ply compressed air containing oil to
supply air tools not designed for
operation on compressed air con-
taining oil.
•
Do not fill tires with compressed air
containing oil.
A
Risk of burns from the sur-
faces of parts carrying compressed
air!
•
Let tool cool off before servicing.
A
Risk of personal injury and
crushing by moving parts!
•
Do not operate the electric tool with-
out installed guards.
•
Please note that the compressor will
start automatically when the pres-
sure falls off to minimum! – discon-
nect from power supply prior to any
servicing.
•
Ensure that when turning ON (e.g.
after servicing) no tools or loose
parts are in the electric tool.
A
Hazard generated by insuffi-
cient personal protection gear!
•
Wear hearing protection.
•
Wear safety glasses.
•
Wear mask respirator when work
generates dust or mist detrimental
to health.
•
Wear suitable work clothes. When
working outdoors wearing of non-
slip shoes is recommended.
A
Hazard generated by electric
tool defects!
•
Keep electric tool and accessories
in good repair. Observe the mainte-
nance instructions.
•
Priot to any use check the electric
tool for possible damage: before
using the electric tool carefully
check safety devices, protection
devices or slightly damaged parts
for proper function as specified.
•
Check to see that all moving parts
work properly and do not jam. All
parts must be correctly installed and
meet all conditions necessary for
the proper operation of the electric
tool.
•
Damaged protection devices or
parts must be repaired or replaced
by a qualified specialist.
•
Have damaged switches replaced
by a service centre.
•
Do not operate electric tool if the
switch can not be turned ON or
OFF.
•
Keep handles free of oil and grease.
3.3

Symbols on the machine

Danger!
Disregard of the following
warning may
severe injury or material
damage.
Read instructions.
Information on the nameplate
15
16
17
18
19
20
21
22
29
30
(15) Manufacturer
(16) Item no., version no., serial no.
(17) Machine designation
(18) Supply voltage / frequency
(19) Motor capacity P
1
(see also "Technical Specifications")
(20) Fuse protection / protection class
(21) No. of cylinders
(22) Motor speed
(23) Suction capacity
(24) Filling rate
(25) Speed compressor pump
(26) Max. pressure
(27) Pressure vessel volume
(28) Year of make
(29) CE-mark – This machine complies
with the EU Directives as per dec-
laration of conformity
(30) Waste disposal symbol – the
machine can be disposed of
through the manufacturer
3.4

Safety devices

Safety valve
cause
The spring safety valve (31) is incorpo-
rated into the pressure switch unit. The
safety valve opens if the max. permissi-
ble pressure is exceeded.

4. Operation

4.1

Prior to initial operation

23
Install wheels
24
1. Install wheels (32) as illustrated.
25
26
27
28
Insert dip stick
1. Remove the plug (33) from the
crankcase.
34
33
2. Substitute the plug with the dip stick
(34) supplied.
The plug prevents oil from leaking from
the crankcase during shipping. Keep
plug for future use.
Install air intake filter
1. Remove plug from air intake of com-
pressor pump housing. Keep plug
for future use.
2. Screw air filter (35) supplied on air
intake.
ENGLISH
31
32
11