Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
Table of Contents
1.
Standard Delivery........................9
2.
Please Read First! .....................10
3.
Safety .........................................10
3.1 Specified conditions of use .........10
3.2 General safety information ..........10
3.3 Symbols on the machine.............11
3.4 Safety devices.............................11
4.
Operation ...................................11
4.1 Prior to initial operation ...............11
4.2 Mains connection ........................12
4.3 Generating compressed air.........12
5.
Care and Maintenance ..............12
5.1 Periodic maintenance..................12
5.2 Machine storage..........................13
6.
Trouble Shooting ......................13
7.
Repairs .......................................13
8.
Environmental Protection ........13
9.
Technical Specifications ..........14
2. Please Read First!
These instructions are written in a way
that will enable you to safely use the
machine in a minimum of time. Here is
how to read the instructions:
− Read these instructions completely
before use. Pay special attention to
the safety information.
− These instructions are intended for
persons having a basic technical
knowledge
in
the
machines
such
as
described here. If you have no expe-
rience with this type of machine you
are advised to seek the advise of an
experienced individual before oper-
ating this machine.
− Keep all documents supplied with
the machine for future reference.
Retain proof of purchase for possi-
ble warranty claims.
− If you hire out or sell this machine be
sure to hand over the machine doc-
uments supplied.
− The equipment manufacturer is not
liable for any damage arising from
disregard of these instructions.
The information in these instructions is
denoted as under:
Danger!
Warning
of
injury or environmental
damage.
Risk of electric shock!
Risk of personal injury
by electric shock.
10
− Numbers in illustrations (1, 2, 3, ...)
− indicate component parts;
− are consecutively numbered;
− refer to the corresponding num-
bers in brackets (1), (2), (3) ... in
the neighbouring text.
− Instructions to be carried out in
sequence are numbered.
− Instructions which can be carried
out in any sequence are preceded
by a bullet.
− Listing are preceded by a M-dash.
3. Safety
3.1
Specified conditions of
use
This machine is intended to generate
compressed air required for the opera-
tion of air tools.
Any use for medical purposes, food
processing as well as filling of oxygen
cylinders for breathing equipment is not
permitted.
Explosive, combustible gases or gases
detrimental to health may not be com-
handling
of
pressed. Operation in hazardous loca-
the
one
tions is not permitted.
Any other use is not as specified. Use
not as specified, alteration of the
machine or use of parts that are not
approved by the equipment manufac-
turer, can cause unforeseeable damage!
Children, juveniles and persons not hav-
ing been instructed in its usage are not
permitted to operate this machine and
any air tools connected to it.
3.2
General safety informa-
tion
•
When
observe the following safety instruc-
tions, to exclude the risk of personal
injury or material damage.
•
Please also observe the special
safety instructions in the respective
chapters.
•
Keep all documents, supplied with
personal
the machine, for future reference.
•
Observe the statuary accident insur-
ance institution regulations and reg-
ulations for the prevention of acci-
dents pertaining to the operation of
air compressors and air tools, where
applicable.
Caution!
Risk of material damage
Note:
Supplementary
informa-
tion.
using
this
electric
tool
A
General hazard!
•
Keep your work area tidy - a messy
work area invites accidents.
•
Be alert. Know what you are doing.
Set out to work with reason. Do not
operate the electric tool while under
the influence of drugs, alcohol or
medication.
•
Consider environmental conditions.
•
Keep work area well lighted.
•
Prevent adverse body positions.
Ensure firm footing and keep your
balance at all times.
•
Do not operate the electric tool near
inflammable liquids or gases.
•
Keep bystanders, particularly chil-
dren, out of the work area. Do not
permit other persons to touch the
tool or power cable while the electric
tool is running.
•
Do not overload the electric tool -
use it only within the performance
range it was designed for (see
"Technical Specifications").
B
Danger! Risk of electric shock!
•
Do not expose the electric tool to
rain.
•
Do not operate the electric tool in
damp or wet environment.
•
Prevent body contact with earthed
objects such as radiators, pipes,
cooking stoves or refrigerators when
operating this electric tool.
•
Do not use the power cable for any
purpose it is not intended for.
A
Risk of personal injury by
escaping compressed air and parts
hurled about by escaping air!
•
Never direct compressed air against
persons or animals!
•
Ensure all air tools and accessories
used are designed for the working
pressure or are supplied via a pres-
sure regulator.
•
Please note that, when disconnect-
ing the quick coupler, the com-
pressed air contained in the pres-
sure hose will escape all of a
sudden. You should therefore firmly
hold the air hose when disconnect-
ing it.
•
Ensure all screwed connections are
fully tightened at all times.
•
Do not attempt to repair the machine
yourself! Only trained specialists are
permitted to service or repair com-
pressors, pressure vessels and air
tools.
Hide quick links:
Advertisement
Chapters
Table of Contents
