Auto Registration - Brother HL-3180CDW Advanced User's Manual

NOTE
• If an error message appears, press OK
and try again.
(For more information, see Basic User's
Guide: Error and maintenance
messages.)
• If you are using the Windows
driver, the driver will get the calibration
data automatically if both
Use Calibration Data and
Get Device Data Automatically are
selected. The factory settings are on
(see Software User's Guide).
• If you are using the Macintosh printer
driver, you must perform the calibration
using the Status Monitor. Turn on the
Status Monitor, and then select
Color Calibration from the Control menu
(see Software User's Guide).

Auto Registration

If solid areas of color or images have cyan,
magenta or yellow fringes, you can use the
auto-registration feature to correct the
problem.
® a
printer
b
c
d
e
Routine maintenance
Press .
Press Auto Regist..
Press Yes to confirm.
Touchscreen will show Completed.
Press .
A
A
37