Calibration - Brother HL-3180CDW Advanced User's Manual

d
Tightly wring out a lint-free cloth soaked
in lukewarm water, and then wipe the
separator pad (1) on the paper tray to
remove dust.
e
Wipe the two pick-up rollers (1) inside
the machine to remove dust.
1
f
Reload the paper and put the paper tray
back in the machine.
g
Press to turn on the machine.
36
1

Calibration

The output density for each color may vary
depending on the machine's environment,
such as temperature and humidity.
Calibration helps you to improve the color
density.
a
Press .
b
Press Calibration.
c
Press Calibrate.
d
Press Yes to confirm.
e
Touchscreen will show Completed.
f
Press .
You can reset the calibration parameters
back to those set at the factory.
a
Press .
b
Press Calibration.
c
Press Reset.
d
Press Yes to confirm.
e
Touchscreen will show Completed.
f
Press .
A