Enlarging Or Reducing Copies - Brother HL-3180CDW Advanced User's Manual

Enlarging or reducing copies

To enlarge or reduce the next copy follow
these steps:
a
Load your document.
b
Press (Copy).
c
Enter the number of copies you want.
d
Press Options.
e
Swipe up or down, or press a or b to
display Enlarge/Reduce.
f
Press Enlarge/Reduce.
g
Press 100%, Enlarge, Reduce or
Custom(25-400%).
h
Do one of the following:
 If you chose Enlarge, press the
enlargement or ratio you want.
 If you chose Reduce, swipe up or
down, or press a or b to display the
reduction ratio you want and press it.
 If you chose Custom(25-400%),
press to erase the displayed
percentage, or press d to move the
cursor, and then enter an
enlargement or reduction ratio from
25% to 400% in 1% increments.
Press OK.
If you chose 100%, go to step i.

4
100%*
200%
141% A5iA4
104% EXEiLTR
97% LTRiA4
94% A4iLTR
91% Full Page
85% LTRiEXE
83%
78%
70% A4iA5
50%
Custom(25-400%)
The factory setting is shown in Bold
*
with an asterisk.
1
Custom(25-400%) allows you to enter a
ratio from 25% to 400% in 1% increments.
i
If you do not want to change additional
settings, press OK.
j
Press Color Start or Black Start.
NOTE
Page Layout is not available with
Enlarge/Reduce.
Making copies
1
4
15