Auto Registration; Manual Registration - Brother  HL-4140CN User Manual

Note
• If an error message is displayed, press
Stop/Exit and try again. (For more
information, see Error and maintenance
messages on page 80.)
• If you print using the Windows
driver, the driver will get the calibration
data automatically if both Use Calibration
Data and Get device data automatically
are on. The default settings are on. (See
Advanced tab in the Software User's
Guide.)
• If you print using the Macintosh printer
driver, you need to perform the calibration
using the Status Monitor. After turning
the Status Monitor on, choose
Color Calibration from the Control
menu. (See Status Monitor in the Software
User's Guide. When the StatusMonitor is
open, choose Control / Color
Calibration from the menu bar.)
78

Auto Registration

Registration
If solid areas of colour or images have cyan,
magenta or yellow fringes, you can use the
®
printer
auto-registration feature to correct the
problem.
a
b
c

Manual Registration

If colour still appears incorrectly after auto-
registration, you will need to perform manual
registration.
a
b
c
d
e
Press Menu, 3, 7.
To start, press 1.
To exit, press 2.
Press Stop/Exit.
Press Menu, 3, 8, 1.
Press Mono Start or Colour Start to
start printing the colour registration
chart.
When the machine has finished printing
the registration chart, press 2
(Set Regist.) to correct the colour
manually.
Starting at 1 (1 Magenta Left) on the
chart, check which coloured bar has the
most uniform print density and enter its
number into the machine using the
a and b keys.
Press OK.
Repeat for 2 (2 Cyan Left), 3
(3 Yellow Left), 4, 5, 6 to 9.
Press Stop/Exit.
A
A
A