Checking The Remaining Life Of Parts; Replacing Periodic Maintenance Parts - Brother HL-3180CDW Advanced User's Manual

Checking the remaining life of
parts
You can see the machine's parts life on the
Touchscreen.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Machine Info..
d
Press Machine Info..
e
Press Parts Life.
f
Press a or b to see the approximate
remaining parts life of the
Drum Black(BK), Drum Cyan(C),
Drum Magenta(M),
Drum Yellow(Y), Belt Unit,
Fuser, PF kit.
g
Press .
NOTE
• The life check will be accurate only if you
reset the part counter when you install a
new part. It will not be accurate if that
part's life counter is reset during the life of
the used part.
• The remaining life of the toner cartridge is
listed on the User Settings report (see
How to print a report on page 13).
40
Replacing periodic
maintenance parts
A
The periodic maintenance parts will need to
be replaced regularly to maintain the print
quality. The Fuser Unit and PF Kit parts listed
in the table must be replaced after printing
approximately 50,000 pages
Customer Service when these messages
appear on the Touchscreen.
Touchscreen
message
Replace Fuser
Replace PF kit Replace the paper feeding
1
Letter or A4 size single-sided pages.
1
. Call Brother
Description
Replace the fuser unit.
kit for the paper tray.
A