Enlarging Or Reducing The Copied Image - Brother DCP-J515W Advanced User's Manual

Enlarging or reducing the
copied image
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
a
Load your document.
b
Enter the number of copies you want.
c
Press a or b to choose
Enlarge/Reduce.
d
Press d or c to choose 100%, Enlarge,
Reduce, Fit to Page,
Custom(25-400%).
e
Do one of the following:
 If you choose Enlarge or Reduce
press OK and press d or c to choose
the enlargement or reduction ratio
you want. Press OK and go to
step f.
 If you choose Custom(25-400%),
press OK, and then press c.
Press a, b, d or c to select a number,
and then press OK repeatedly until
you complete to enter the number.
Press a, b, d or c to select
and press OK.
Go to step f.
 If you choose 100% or
Fit to Page, press OK. Go to
step f.
198% 10x15cmiA4
3
186% 10x15cmiLTR
142% A5iA4
100%
97% LTRiA4
93% A4iLTR
(DCP-J515W)
83%
(DCP-J715W)
83% LGLiA4
69% A4iA5
47% A4i10x15cm
Fit to Page
Custom(25-400%)
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
• Page Layout is not available with
Enlarge/Reduce.
• Page Layout, Book Copy, Sort and
Watermark Copy are not available with
Fit to Page.
• Fit to Page does not work properly if
the document on the scanner glass is
,
OK OK
skewed by more than 3 degrees. Using
the document guidelines on the left and
top, place your document in the upper left
hand corner, with the document face down
on the scanner glass.
• (DCP-J715W only)
Fit to Page is not available when
using the ADF.
Making copies
3
5