Schedule Screen - Uniden GDVR 42 Series Owner's Manual

Schedule screen

The schedule screen lets you set up recording schedules. It has 2 tabs:
Schedule
•
motion
•
Schedule Tab
This tab sets up a basic schedule for recording.
(Default = No recording blocks selected)
1. Select a channel whose recording schedule you want to set up.
2. Select the (
to record.
3. Select one-hour blocks to add to the recording setup.
4. When you have the schedule set up as you want it, select apply. The
configuration for that channel is now saved.
5. If you want to use that same configuration on another channel, select that
channel in the dropdown box for apply settings To. Then, select copy.
The configuration is now copied to the second desired channel.
6. If you want to apply the settings from one channel to ALL channels,
select all in the dropdown box for apply settings To. Then, select copy.
The configuration is now copied to all channels.
7. Select apply to save the settings.
8. Select Exit.
Motion Tab
This tab sets up a schedule for motion sensor recording. (Default = All
recording blocks selected)
1. Select a channel whose motion sensor recording schedule you want to
set up.
2. Select the erase icon (
DO NOT want that channel to record.
3. When you have the schedule set up as you want it, select apply. The
configuration for that channel is now saved.
) icon to set 1-hour blocks when you WANT that channel
) and click on the 1-hour recording blocks you
39