Replacement Procedure - Epson SC-S60600 Series User Manual

SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Shaking method
A
Make sure the printer is on, and then remove
the ink cartridge.
When replacing a cartridge, remove the new
one from the bag.
B
Hold the cartridge horizontally and shake it in
both directions about 5 cm approx. 15 times in
5 seconds.
In the case of OR, WH, or MS, shake it well
approx. 50 times in 15 seconds during
replacement only.

Replacement procedure

If an ink low warning is displayed, replace as soon as
possible. If one of the installed ink cartridges is
expended, printing cannot be performed.
c
Important:
When the message Ink Cartridge Expended
appears with use of WH/MS ink, replace the
cartridge with a new one immediately.
If the printer is left with the ink remaining alert
displayed, a print head or other part may be
damaged.
If an ink cartridge is expended while printing, you can
continue printing after replacing the ink cartridge.
However, when replacing ink during a print job, you
may see a difference in color depending on the drying
conditions.
The following procedure explains how to replace ink
cartridges and Cleaning Cartridge.
Maintenance
c
Important:
Epson recommends the use of genuine Epson ink
cartridges. Epson cannot guarantee the quality or
reliability of non-genuine ink. The use of
non-genuine ink may cause damage that is not
covered by Epson's warranties, and under certain
circumstances, may cause erratic printer behavior.
Information about non-genuine ink levels may
not be displayed, and use of non-genuine ink is
recorded for possible use in service support.
A
Make sure the printer is on.
B
Lift the lock lever for the cartridge you intend
to replace.
C
Insert a finger into the depression on the top of
the cartridge and pull the cartridge straight
toward you.
c
Important:
Removed ink cartridges may have ink
around the ink supply port, so be careful not
to get any ink on the surrounding area when
removing the cartridges.
67