Epson SC-S60600 Series User Manual page 39

SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
B
Press the d button in the control panel to feed
enough media for a single wrap around the roll
core.
C
Flip the Auto switch to Off, and hold down the
Manual switch to
once around the roll core.
Basic Operations
to wrap the media
39
D
Flip the Auto switch to
E
Lower the tension bar until it slightly touches
the media.
F
Confirm that the media is attached without
looseness.
If the tension on the left and right of the media
is different in the areas shown in the
illustration below, the media will not be taken
up correctly. When one side is loose, restart the
procedure from Step 1.
.