Packing Instruction - McIntosh MA6300 Owner's Manual

Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as
shown below. It is very important that the four plas-
tic feet are attached to the bottom of the equipment.
This will ensure the proper equipment location on the
bottom pad. Failure to do this will result in shipping
damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition. If
a shipping carton or any of the interior part(s) are
needed, please call or write Customer Service Depart-
ment of McIntosh Laboratory. Refer to page 3. Please
see the Part List for the correct part numbers.
Quantity Part Number Description
1 033888 Shipping carton only
4 033887 End cap
1 033697 Inside carton only
1 033725 Top pad
1 034301 Bottom pad
1 033699 Shipping skid
2 017218 Plastic foot spacers
2 101204 #10 x 2-1/4" wood screws
2 104033 #10 x 1-3/4" flat washer
4 017937 Plastic foot
4 100159 #10-32 x 3/4" screw
4 104083 #10-7/16" Flat washer
Packing Instructions
19