Packing Instruction - McIntosh MC1502 Owner's Manual

Packing Instructions
In the event it is necessary to repack the equipment
for shipment, the equipment must be packed exactly
as shown below. It is very important that the four feet
are attached to the bottom of the equipment. This will
ensure the proper equipment location on the bottom
foam pad. Failure to do this will result in shipping
damage.
To protect the tubes during shippment, the Foam
Insert removed from the MC1502 needs to be re-
inserted. Follow the unpacking instructions on pages
4-5 in the reverse order.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition. If
a shipping carton or any of the interior part(s) are
needed, please call or write Customer Service Depart-
ment of McIntosh Laboratory, refer to page 2. Please
see the Part List for the correct part numbers.
Quantity Part Number Description
1 034649 Shipping Carton Top
1 034652 Shipping Carton Bottom
1 034600 Foam Tube (for protecting
the Tubes during shipping)
1 034650 Foam End Cap Top
1 034651 Foam End Cap Bottom
4 034653 Foam Ring
1 241109 Warning Sheet
4 400159 10-32 x 3/4 inch screw
4 017937 Feet
4 404080 #10 washer
Foam End
Cap Top
Foam Ring
Tube Cover
Warning Sheet
Foam Tube
Protection Cover
Shipping Carton
Top
Foam End Shipping Carton
Cap Bottom
Bottom
Packing Instructions
Power Cord Manual
15