Performing A Blood Glucose Test - ForaCare GD40 Owner's Manual

Performing a blood glucose Test

Step 1
Insert the test strip to turn on the
meter
There will be a strip light indicating
the test strip is inserted into the
test slot. Wait for the meter to dis-
play the "
Step 2
Select the appropriate measuring mode by pressing
For selecting the measurement mode, please refer to the FOUR
MEASURING MODES .
Step 3
Obtaining a blood sample
Use the pre-set lancing device to puncture
the desired site. After penetration, discard
the first drop of blood with a clean cotton
swab. Gently squeeze the punctured area to
obtain another drop of blood. Be careful NOT
to smear the blood sample.
The volume of blood sample must be at least
1.1 microliter ( μ L) of volume. ( actual size).
" and " " symbols.
.
25