Performing A Blood Glucose Test - ForaCare Premium V10 Owner's Manual

Performing a Blood Glucose Test

2. Select the appropriate measuring mode (General or QC) by pressing
.
For selecting the measurement mode, please refer to the TWO
MEASURING MODES .
1. Insert the test strip to turn on the
meter
Wait for the meter to display
flashing .
Voice Guide
Thank you for using this product. Please
relax during measurement. Please apply
blood into the strip.
3. Obtaining a blood sample
Use the pre-set lancing device to puncture
the chosen site. After lancing wipe away
the first drop of blood with a clean cotton
swab. Gently squeeze the punctured
area to obtain another drop of blood. Be
careful NOT to smear the blood sample.
The volume of blood sample must be at
least 0.5 microliter ( μ L) of volume.
( actual size)
and
21