Cautions On Use; 1, Lubrication ( 1); 2, Lubrication (2); 3, Oiling Condition - HIGHLEAD GC24698-1L Instruction Manual

• Cautions on use
1. Oiling (1) (Fig.1)
Filling the oil reservoir with oil up to "H'' mark. Oil level should be
periodically checked. If oil; level is found below "L"; level replenish oil to
"H" level.
Use white spindle oil.
2. Oiling (2) (Fig.2, Fig.3)
When a new sewing machine is used for the first time, or sewing
machine left out of use for considerably long time is used again,
replenish a suitable amount of oil to the portions indicated by arrow
in the below figure.
3. Oiling condition (Fig.3)
See dripping of oil through the oil sight hole to check oiling
condition during operation.
4. Cautions on operation
l ) When the power is turned on or off, keep foot away from
the pedal.
2) It should be noted that the brake might not work when the
power is interrupted or power failure occurs during sewing machine
OQeration.
3) Since dust in the control box might cause malfunction or
control troubles, be sure to keep the control box cover close during
operation.
4) Do not apply a Multimeter to the control circuit for checking;
------
Otherwise voltage of Multimeter might damage semiconductor components in the circuit.
• Operation
1. Installation of needles (Fig.4)
Note: Before installing the needles, be sure to turn off the power.
··· ·GC24698-1
GC24698-1 - ..
4
- 2 -
Wnding amount
adjusting screw
~
0
I
Even winding wrth
an amount 415 of
fully capacity
5