Preparation For Operation; Safety Precautions; 2, Precautions Before Starting Operation; 3, Precautions For Operating Conditions - HIGHLEAD GC24698-1L Instruction Manual

• Preparation for operation:
1. Safety
prec~utions:
1 ) When turning the power on, keep your hands and fingers away from the area around/under the needle
and the area around the pulley.
2) Power must be turned off when the machine is not in use, or when the operator leaves the seat.
3) Power must be turned off when tilting the machine head, installing or removing the "V" belt, adjusting
the machine, or when replacing.
4) Avoid placing fingers, hairs, bars etc. near the pulley, "V" belt, bobbin winder pulley, or motor when
the machine is in operation.
5) Do not insert fingers into the thread take-up
cow~.r,
under/around the needle, or pulley when the
machine is in operation.
6)
I'f
a belt cover, finger guard, eye guard are installed, do not operate the machine without
these safety devices.
2. Precautions before starting operation:
l ) Never operate the machine before filling the machine's oil pan.
2) When a new sewing machine is first turned on, verify the rotational direction of the pulley with the
pcwer en.
3)
Verify the voltage and phase (single or three) with those given on the machine nameplate.
3. Precautions for operating conditions:
I ) Avoid using the machine at abnormally high temperatures ( 35
·c
or higher) or low temperatures ( 5 °C
or lower)
2) Avoid using the machir:e in dusty conditions.
Overall view of assembled sewing machine
Balance wheel
- 1 -