Door - Miele DG 6401 Operating And Installation Instructions

Door

Removing the door
 Prepare a suitable underlay for the
door, such as a soft cloth.
Before removing the door, the locking
clamps on both hinges have to be re‐
leased.
 Open the door fully.
 Release the locking clamps on the
hinges by pushing them down. Turn
them as far as they will go in an an‐
gled position.
Cleaning and care

Danger of injury from the hinge
guides for the door.
The hinge guides can flip back
against the steam oven.
Never attempt to pull the door off the
hinge guides from a horizontal posi‐
tion.
 Raise the door up till it rests open.
Risk of damage to the door.
The door handle could break off and
the glass could be damaged.
The door should be gripped firmly at
the sides and not at the handle when
being removed.
Make sure that you lift the door off
evenly on both sides.
 Hold the door on either side and pull
diagonally upwards from the hinge
guides.
 Place the door on the previously pre‐
pared surface.
99