Lp Step 3: Assemble Lp - Paramount Fitness MP 3.5 Assembly Manual

1. The leg press can be mounted to
two different locations on the
mainframe when the cable column
is not used. See pictures below.
2. Route the Leg Press cable through
the opening in the Upright frame as
shown
3. Loosely assemble ALL hardware
shown in this step.
4. After aligning all component edges
and surfaces, tighten the hardware.
LP S 3: A
TEP
13
LP
SSEMBLE
IMPORTANT!
The leg press can be mounted
to two different locations.
However, if the cable column
is used, the leg press must be
mounted as in Fig.2.
Fig.1
U
TO PRIGHT
Fig.2