Carburetor; Removing And 16. Installing - Stihl MS 341 Shop Manual

1
: Unscrew the nuts (arrows).
: Pull off the baffle (1).
1
: Remove the filter base (1).
: Remove the baffle plate (2).
Reassemble in the reverse
sequence.
: Check that baffle plate is
correctly fitted (arrows).
MS 341, MS 361, MS 361 C
– Before installing the air filter,
check that O-ring (1) is properly
seated and not damaged.
Reassemble all other parts in the
reverse sequence.
2
12.2

Carburetor

12.2.1 Removing and Installing
1
– On machines without
Quick-Stop Super, remove the
throttle rod from the trigger –
b 10.2.1
– On machines with
QuickStop Super, remove the
throttle rod from the trigger –
b 10.2.2
: Disconnect the throttle rod (1)
from the throttle shaft (2).
1
On machines with carburetor
heating
: Remove the heating plate (1).
2
1
75