Table of Contents
Advertisement
I
nitial set-up of your oven
Setting the time of day
After your appliance is connected to your mains supply for the first
time, you must set the time of day before you can use the oven.
o When the oven is connected to your mains supply for the first time
(or after a power cut), the digits on the LED display (7) will flash
and there
will be an audible signal.
o Press the clock button (3) and the hour digits will flash on the LED
display.
o Turn the adjustment knob (6) to adjust the hour time. Your oven
has a 24 hour clock, so it is possible to adjust the hour digit
between 0 and 23.
o When the correct hour time appears on the LED display, press the
clock button again. The minute digits will flash
o Turn the adjustment knob to adjust the minute time; it is possible
to adjust the minute digit between 0 and 59.
o When the correct minute time appears on the LED display, press
the clock button for a thir
o The ":" symbol between the digits will flash and the time of day
light on the LED display.
I
MPORTANT: You can adjust the time of day at any time by
following the ins
c
urrently in use.
Before first use
o To remove any residue from the oven that may have been left from
the manufacturing process, you should select the fan oven function
and set the thermostat to its maximum temperature setting.
It is perfectly normal
o
o You should make sure that any windows in the room are left open
during this process.
o It is advisable for you not to remain in the room whilst the burning
off proces
s is taking place.
d time to confirm the time of day.
tructions above, as long as the oven is not
for a smell to be produced during this process.
on the LED display.
will
11
Advertisement
Table of Contents
