Dahua HD Cube Network Camera Quick Start Manual page 6

Dahua HD Cube Network Camera Quick Start Guide
SN Port Name
3 PIR sensor
4 IR light
5 Speaker
6
Microphone
7 Micro SD card
8 Network port
9 Power port
Reset/WPS
10
button
11 Alarm port
Port Name SN
1
2
I/O Port
3
4
Indicator Connector
PIR /
/ /
/ /
/ /
Micro
Micro SD
card slot
LAN Ethernet port
DC12V /
Reset/WPS
- I/O port
Name
ALARM_COM
ALARM_NO
GND
ALARM_IN
Note
Passive IR motion detect port. It
can detect the IR object movement
(such as human body or other
heating object).
Note:
Only certain
function.
For lighting at night
Output audio signal.
(This function is optional. For some
series product only.)
Directly receive audio signal.
SD card storage.
SD
(This function is optional. For some
series product only.).
Connect to standard Ethernet cable.
Note:
Some models do not support PoE.
Input DC 12V power.
When device works normally:

Press the WPS button of the
router
respectively for at least 2
seconds. Usually the device
can connect to the router.
(Optional function supported by
some series)

Press the button for 10s,
device
settings.
Alarm info input/output (optional,
supported by some models only)
Note
Alarm output port. It is to output the alarm signal
to the alarm device.
Idle
Ground port
Alarm input port. It is to receive the on-off signal
from the external alarm source.
series have this
and the device
restores default
2