Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Dahua HD4-TD27
Summary of Contents for Dahua HD4-TD27
- Page 1 HDAVS Camera User’s Manual Version 1.0.2...
-
Page 2: Table Of Contents
Table of Contents General Introduction........................1 Overview........................1 Features......................... 1 Device Framework........................2 Installation............................5 Model A............................5 Model B1 and B2........................6 Model C............................7 Model D............................7 Model E............................9 Menu............................10 HAVR Settings......................10 Menu Operation......................10 Set Audio Coax......................11 .............................. - Page 3 Welcome Thank you for purchasing our HDAVS camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference! Important Safeguards and Warnings Electrical safety All installation and operation here should conform to your local electrical safety codes.
- Page 4 It is recommended to use the device with thunder proof device in order to improve thunder proof effect. The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera. Do not touch the CCD (CMOS) optic component directly. You can use the blower to clean the dust or dirt on the lens surface.
-
Page 5: General Introduction
1 General Introduction 1.1 Overview This series HDAVS camera conforms to the HDAVS standard. It supports video signal high- speed long distance transmission without any delay. It can be controlled by the HAVR conforming to the HDAVS. 1.2 Features High-performance CMOS image sensor, megapixel definition. ... -
Page 6: Device Framework
2 Device Framework See Figure 2-1 for the dimension of model A. Figure 2-1 See Figure 2-2 and Figure 2-3 for the dimension of model B1 and model B2. Figure 2-2 Figure 2-3... - Page 7 See Figure 2-4 for the dimension of model C. Figure 2-4 See Figure 2-5 for the dimension of model D. Figure 2-5 See Figure 2-6 for the dimension of model E. Figure 2-6...
- Page 8 The device ports include one DC12V power input port and one BNC video output port. Please refer to Figure 2-7 for DC12V power input port. Figure 2-7 Please refer to Figure 2-8 for video output port. Figure 2-8 Note Video output port outputs HDAVS HD video by default. HD/SD output can be switched via PFM820 (UTC Controller) or OSD menu →Advanced →Video Output.
-
Page 9: Installation
3 Installation Important Before the installation, please make sure the installation surface can sustain at least 3X weight of the bracket and the camera. Model A Figure 3-1 Step 1 Hold the decoration ring tightly and unscrew the pedestal anticlockwise. Step 2 Confirm the installation location and dig holes on the installation surface. -
Page 10: Model B1 And B2
So far the device installation and cable connection are completed; you can check the image via back-end coding device. Note 1) Please use wide slotted screwdriver to avoid damaging screws during focus and zoom; 2) It is not allowed to twist screw violently when ZOOM is adjusted to W or T. Model B1 and B2 Figure 3-2 Step 1... -
Page 11: Model C
So far the device installation and cable connection are completed; you can check the monitoring image via back-end coding device. Model C Figure 3-3 Step 1 Hold the decoration ring tightly and unscrew the pedestal anticlockwise. Step 2 Confirm the installation location and dig holes on the installation surface. Step 3 Use tools to insert expansion bolts into the installation holes and fix them firmly. - Page 12 Figure 3-4 Step 1 Rotate the enclosure to align the arrow on the enclosure edge with the arrow on the pedestal edge; press inward according to the arrow location of the enclosure and meanwhile push outward according to the arrow location of the pedestal to separate the concave; pull the enclosure to make it break away from the pedestal.
-
Page 13: Model E
Model E Figure 3-5 Step 1 Loosen locking screws anticlockwise and remove the pedestal. Step 2 Confirm the installation location and dig holes on the installation surface. Step 3 Use tools to insert expansion bolts into the installation holes and fix them firmly. Step 4 Adjust pedestal location (if it is side cable outlet, then pull the cable through the side outlet cable slot). -
Page 14: Menu
4 Menu 4.1 HAVR Settings This HDAVS camera series can adjust OSD menu via coaxial control. After connected the camera to the HDAVS series HAVR, from Main Menu->Setting->System->PTZ, you need to select the channel number for access and set control mode as HDAVS and the protocol as HD-AVS. -
Page 15: Set Audio Coax
Figure 4-3 See Sheet 4-1 for the details of button functions. Button Function Open menu Select menu item 、 Select menu value 、 Sheet 4-1 4.3 Set Audio Coax From “Main Menu > Setting > Camera > Encode > Encode”, you need to set “Audio Format” as “G711a”... - Page 16 Figure 4-4 If there is “ ”, click the “Confirm” button in “Menu Operation” interface to go to the 2nd menu. Click “Return” button to go back to the previous menu interface. Please use an UTC controller or enter the OSD menu for to switchover between HD & SD video output.