Waeco CoolFun SC26 Instruction Manual page 25

CoolFun SC26, SCT26, SC30, SC38
5.1 Control elements
No. in
fig. 2, page 3
1
2
3
4
5
6
7
Only SC30, SC38:
The desired mode is selected with the cold/hot switch (fig. 2 5, page 3).
When the cooler is connected to an AC mains supply, it can be used in two
different operating modes:
 ECO mode: the cooler consumes less energy
 MAX mode: the cooler reaches maximum cooling capacity
The desired cooling capacity is selected with the cooling capacity control
(fig. 2 6, page 3):
➤ To increase the cooling capacity, turn the cooling capacity control clock-
wise.
For the maximum cooling capacity turn the cooling capacity control
clockwise all the way to the stop (MAX position).
➤ To decrease the cooling capacity, turn the cooling capacity control
counterclockwise.
To turn off the cooler, turn the cooling capacity control counterclockwise all
the way to the stop (OFF position).
When the cooler is connected to the DC socket, the cooling capacity cannot
be adjusted.
EN
Description
USB port for power supply
Connection cable DC connection
Connection cable for AC connection
Ventilation slots
Cold/hot switch
Cooling capacity control
Handle
Technical description
25